Select the connection.
Select the NON-DRILL connection for the anchor and application.
Discuss your project How It Works
Use existing anchors.Or plan theminto the project.
Zero Drilling. Zero Damage. Zero Compromise. Fast.
Discuss your projectOne System, Different Project Needs and Stages
Temporary or Permanent.
Where lifting anchors are already available, NON-DRILL uses the matching interchangeable connection to install the Edge Protection post without drilling new holes.
If the project is still being designed, suitable connection points can be incorporated before the concrete element is manufactured or poured, so the fixing is ready when the handrail is needed.
Quick and Easy to Install
One simple system.Three clear steps.
The final product, configuration and installation method must be confirmed for the specific anchor and project.
Secure it to the anchor.
Secure NON-DRILL to the lifting anchor already cast into the concrete.
Tighten the post.
Tighten the NON-DRILL post down to the concrete surface.
Why the connection matters
No drilling.No concrete damage.
No drilling for the NON-DRILL connection
No silica dust generated by drilling this fixing
No drilled holes or avoidable surface scarring
A faster, simpler installation pathway
Common questions
The essentials, without the technical avalanche.
Does NON-DRILL require new holes to be drilled into concrete?
No. The NON-DRILL pathway uses an existing cast-in connection or an anchor planned into the project design.
Can NON-DRILL be considered after the concrete has been cast?
Yes. Existing lifting anchors are the most common starting point. The anchor type, position and application still need to be reviewed.
What information is needed to identify the right connection?
Anchor information, drawings, dimensions and clear photographs help NON-DRILL identify the likely product and next step.
Discuss your project
Show us the anchor and the application.
Send the project stage, anchor details, drawings or photographs you have. NON-DRILL can help identify the likely next step.
Discuss your project